In the current project, a new systematic approach has been developed, called SAPIUM (systematic approach for input uncertainty quantification methodology) for transparent and rigorous model IUQ. This...

Recent operating experience in nuclear power plants has shown that there is a safety concern associated with the use of new industrial devices, including digital devices, in safety power systems in b...

Cabri Reactor (Commissariat à l’énergie atomique et aux énergies alternatives)

The Cabri International Project (CIP) began in March 2000 to study the behaviour of nuclear fuel rods and cladding durin...

A cabinet containing copper bus before the HEAF test (left) and after the test(right). Source: NRC

Massive electrical discharges, referred to as high energy arcing faults (HEAF), have occurred in nuc...

With the growing importance of SMRs, following the proposal of the CSNI Bureau, the CSNI has decided to create an Expert Group on SMRs (EGSMR), at its 69th meeting held on 2-3 June 2021.

Left: Test facility for qualification of melt spreading tests. Photo: Argonne National Laboratory (ANL).
Right: Example of corium melt pouring for a melt spreading preparatory test. Photo: Argonne Nat...

The present report summarises the main results and learnings from the third phase of the NEA Behaviour of Iodine Project (BIP-3), which was conducted between 2016 and 2019 by the Canadian Nuclear Lab...

In order to reach a better understanding of countries’ different approaches to the evaluation of vibrations detected in piping systems and components, the NEA Committee on the Safety of Nuclear Insta...

The aim of this report is to examine whether there are any international variations in the electrical power system designs (“design variations”) of nuclear power plants that affect the system respons...

Left: Scheme of Studsvik LOCA test facility Right: Microstructure of fragmented nuclear fuel, Studsvik

Scheme showing the technical scope of NEA ICDE project activities, NEA 

Common-cause failure (CCF) events can significantly affect the availability of safety systems of nuclear power plants. In recog...

Two new reports from the WGFS highlight the latest developments in RIA research.

Units 1 and 2 End of Fukushima Daiichi Nuclear Power Station of Tokyo Electric Power Company Holdings (4^th October, 2011). Photo: Tokyo Electric Power Company Holdings

The Benchmark Study of the Acci...

End state of debris in the units 1-3 of Fukushima Daiichi Nuclear Power Station of Tokyo Electric Power Company Holdings. Photo: Japan Atomic Energy Agency

The Preparatory Study on Analysis of Fuel D...

^{View of the ATLAS experimental loop. KAERI, Korea}

The Advanced Thermal-hydraulic Test Loop for Accident Simulation (ATLAS) Project was referenced in The Fukushima Daiichi Nuclear Power Plant Accident...

In the ASCET Phase III, the goal was to assess and develop the Phase II (blind benchmark) recommendations using additional test results. The Phase III simulations were performed using a full set of t...

Since 2001, the NEA has supported the Senior Expert Group on Safety Research Thermal-hydraulics (SETH), the Primärkreislauf-Versuchsanlage - Primary Coolant Loop Test Facility (PKL), PKL-2 and PKL-3 ...