Cabri Reactor (Commissariat à l’énergie atomique et aux énergies alternatives)

The Cabri International Project (CIP) began in March 2000 to study the behaviour of nuclear fuel rods and cladding durin...

A cabinet containing copper bus before the HEAF test (left) and after the test(right). Source: NRC

Massive electrical discharges, referred to as high energy arcing faults (HEAF), have occurred in nuc...

Left: Test facility for qualification of melt spreading tests. Photo: Argonne National Laboratory (ANL).
Right: Example of corium melt pouring for a melt spreading preparatory test. Photo: Argonne Nat...

The present report summarises the main results and learnings from the third phase of the NEA Behaviour of Iodine Project (BIP-3), which was conducted between 2016 and 2019 by the Canadian Nuclear Lab...

In order to reach a better understanding of countries’ different approaches to the evaluation of vibrations detected in piping systems and components, the NEA Committee on the Safety of Nuclear Insta...

The aim of this report is to examine whether there are any international variations in the electrical power system designs (“design variations”) of nuclear power plants that affect the system respons...

Left: Scheme of Studsvik LOCA test facility Right: Microstructure of fragmented nuclear fuel, Studsvik

Two new reports from the WGFS highlight the latest developments in RIA research.

Units 1 and 2 End of Fukushima Daiichi Nuclear Power Station of Tokyo Electric Power Company Holdings (4^th October, 2011). Photo: Tokyo Electric Power Company Holdings

The Benchmark Study of the Acci...

End state of debris in the units 1-3 of Fukushima Daiichi Nuclear Power Station of Tokyo Electric Power Company Holdings. Photo: Japan Atomic Energy Agency

The Preparatory Study on Analysis of Fuel D...

In the ASCET Phase III, the goal was to assess and develop the Phase II (blind benchmark) recommendations using additional test results. The Phase III simulations were performed using a full set of t...

Since 2001, the NEA has supported the Senior Expert Group on Safety Research Thermal-hydraulics (SETH), the Primärkreislauf-Versuchsanlage - Primary Coolant Loop Test Facility (PKL), PKL-2 and PKL-3 ...

Nuclear Fuel Cycle Facilities Safety Week

The NEA Working Group on Digital Instrumentation and Controls (WGDIC) has agreed that a consensus position on the impact of cyber security features on digital instrumentation and control (I&C) system...

This report presents a study performed on a set of common-cause failure (CCF) events within the International Common-cause Failure Data Exchange (ICDE) Project. The topic was multi-unit CCF events.

T...

This report presents a study performed on a set of common-cause failure (CCF) events within the Nuclear Energy Agency (NEA) International Common-cause Failure Data Exchange (ICDE) Project. The topic ...

The cold leg mixing computational fluid dynamics (CFD) – uncertainty quantification (CLM-UQ) benchmark is the fifth benchmark concerning CFD applications to nuclear reactor safety to be organised in ...

CHIP experimental facility to study fission product transport and deposition in the primary circuit. Photo: IRSN

Following several years of experimental research in the field of source terms analysis...

Following the recommendations from the technical workshop on “Nuclear Fuel Behaviour during Reactivity-Initiated Accidents” organised by the Nuclear Energy Agency (NEA) in September 2009, a first ben...

Appearance of Unit 1 and 2 reactor buildings at Fukushima Daiichi Nuclear Power Station of Tokyo Electric Power Company Holdings (June 2022). Photo: Japan Nuclear Regulation Authority

The FACE projec...

Since its inception in 2002, the operating experience with thermal fatigue mechanisms has been an intrinsic aspect of the technical scope of CODAP, which is a joint database project within the Commit...

This report summarises the work done for the activity: “Benchmark analysis on the eXtended Finite Element Method (X-FEM) calculation technology in its use to evaluate the fracture mechanics stress in...

The Specialists Workshop on Advanced Instrumentation and Measurement Techniques for Experiments Related to Nuclear Reactor Thermal Hydraulics and Severe Accidents (SWINTH-2019), co-organised by the S...

Prevention, mitigation and management of potential accidents in nuclear power plants

This report provides insights from a survey of Nuclear Energy Agency (NEA) member countries on the concepts used to establish effective measures to cope with external flooding hazards and on the term...

The VeRCoRs facility mock-up is a reactor containment building at 1/3 scale. The mock-up is instrumented so that its behaviour is monitored from the beginning of construction. More than 700 sensors a...

This report presents a study performed on a set of common-cause failure (CCF) events within the International Common-Cause Failure Data Exchange (ICDE) project. The topic of the study was intersystem...

The joint NEA-IAEA symposium hosted by the United Kingdom’s Office for Nuclear Regulation brought together experts to exchange on the use and application of Probabilistic Safety Analysis (PSA) for re...

CSNI and CNRA held their biannual meetings and a joint session at the NEA headquarters.

The Symposium is free of charge for all participants and is scheduled to take place in person at the ONR’s offices near Liverpool in the United Kingdom. 

Key Dates

Joint NEA and IAEA event will explore probabilistic safety assessment for reactors of singular designs

The investigation conducted in the last 15 years on different aspects of Source Term worldwide, and particularly in the context of the Nuclear Energy Agency (NEA) in the form of projects and the Work...

One of the key areas in fuel safety is the analysis of fuel behaviour under reactivity-initiated accident conditions. Reactivity-initiated accident fuel rod codes have been developed for a significan...

Independent safety regulation has been a hallmark of the global nuclear power sector from its beginnings. Industry and government have long understood the importance of a predictable and adaptable re...

After the Fukushima nuclear accident, many activities were initiated in the countries with nuclear energy to assess the robustness of nuclear power plants with respect to earthquakes, tsunamis and fl...

Within the context of the Nuclear Energy Agency (NEA) Advanced Thermal-hydraulic Test Loop for Accident Simulation (ATLAS) project, a series of tests were performed to resolve key thermal-hydraulic s...

When looking for a validation experiment for CFD application to reactor simulation for either design or safety studies, it appears that available data often suffer from a lack of local measurements, ...

Uncertainty in relation to several severe accident phenomena plays a major role in probabilistic safety analyses involving beyond-design-basis accident scenarios for nuclear power plants. The technic...

The Workshop on Experimental Validation and Application of CFD and CMFD Codes to Nuclear Reactor Safety Issues, CFD4NRS-7 was the seventh in a series of workshops focusing on Computational Fluid Dyna...

The Committee on the Safety of Nuclear Installations (CSNI) Workshop on Structural Reliability Evaluation and Mechanical Probabilistic Approaches of NPP Components was held in Lyon, France on 25-27 S...

In 2007, the NEA Committee on the Safety of Nuclear Installations (CSNI) issued a report titled Nuclear Safety Research in OECD Countries: Support Facilities for Existing and Advanced Reactors (SFEAR...

The NEA Committee on Nuclear Regulatory Activities (CNRA) and the Committee on the Safety of Nuclear Installations (CSNI) held their biannual meetings from 6 to 9 December 2021 and discussed the evol...

This activity of the Nuclear Energy Agency (NEA) Committee on the Safety of Nuclear Installations (CSNI) Working Group on Integrity and Ageing of Components and Structures (WGIAGE) is entitled “Asses...

CNRA/CSNI meetings, May-June 2021.