RASPLAV-A-Salt Facility, EREC.

The RASPLAV* Project was regarded as a successor to the Three Mile Island Vessel Investigation Project (TMI-VIP) completed in 1993. The TMI-VIP Project was set up t...

Left: Test facility for qualification of melt spreading tests. Photo: Argonne National Laboratory (ANL).
Right: Example of corium melt pouring for a melt spreading preparatory test. Photo: Argonne Nat...

Scheme of the ROSA LSTF facility, JAEA

The Rig-of-safety Assessment (ROSA) Project aimed to resolve issues in thermal-hydraulics analyses relevant to light water reactor (LWR) safety using the Japa...

Photo: RBHT Test Facility. US NRC.

Modelling reactor core behaviour under accident conditions with delayed re-introduction of cooling water (commonly referred to as reflood) is a challenge for safety...

Photos: SFP testing. Left: fuel assembly after a Zr fire; right: fire ignition test. SNL/USNRC.

The goal of the Sandia Fuel Project was to provide experimental data relevant for hydraulic and ignitio...

Post-test view inside OLHF-4 vessel showing penetrations and resolidified weld material at the vessel bottom.

During a severe accident, the lower head of a reactor pressure vessel (RPV) can be subj...

The NEA Second Framework for Irradiation Experiments (FIDES-II) supports the fuel and material experimental needs of nuclear safety regulators, technical support organisations, research institutions ...

Scheme of the PKL facility, Framatome GmbH.

The SESAR Thermal-hydraulics (SETH) Project began in 2001 and consisted of thermal-hydraulic experiments in support of accident management, which were ca...

                                                                                  EPICUR facility, IRSN.

STEM phases

First phase (2011-2015)

The STEM Project was initiated with a first phase in 20...