RASPLAV-A-Salt Facility, EREC.

The RASPLAV* Project was regarded as a successor to the Three Mile Island Vessel Investigation Project (TMI-VIP) completed in 1993. The TMI-VIP Project was set up t...

Left: Test facility for qualification of melt spreading tests. Photo: Argonne National Laboratory (ANL).
Right: Example of corium melt pouring for a melt spreading preparatory test. Photo: Argonne Nat...

Scheme of the ROSA LSTF facility, JAEA

The Rig-of-safety Assessment (ROSA) Project aimed to resolve issues in thermal-hydraulics analyses relevant to light water reactor (LWR) safety using the Japa...

Photo: RBHT Test Facility. US NRC.

Modelling reactor core behaviour under accident conditions with delayed re-introduction of cooling water (commonly referred to as reflood) is a challenge for safety...

Photos: SFP testing. Left: fuel assembly after a Zr fire; right: fire ignition test. SNL/USNRC.

The goal of the Sandia Fuel Project was to provide experimental data relevant for hydraulic and ignitio...

Post-test view inside OLHF-4 vessel showing penetrations and resolidified weld material at the vessel bottom.

During a severe accident, the lower head of a reactor pressure vessel (RPV) can be subj...

The NEA Second Framework for Irradiation Experiments (FIDES-II) supports the fuel and material experimental needs of nuclear safety regulators, technical support organisations, research institutions ...

Scheme of the PKL facility, Framatome GmbH.

The SESAR Thermal-hydraulics (SETH) Project began in 2001 and consisted of thermal-hydraulic experiments in support of accident management, which were ca...

                                                                                  EPICUR facility, IRSN.

STEM phases

First phase (2011-2015)

The STEM Project was initiated with a first phase in 20...

Image at melt distribution and its contour at MBC (KAERI).

The Committee on the Safety of Nuclear Installations (CSNI) Working Group on Analysis and Management of Accidents (WGAMA) initiated a co...

Fire protection layer for electrical cables

The Stress Corrosion Cracking and Cable Ageing Project (SCAP) lasted four years (2006-2010). The project’s main objectives were to:

• establish two comple...

Left: Scheme of Studsvik LOCA test facility Right: Microstructure of fragmented nuclear fuel, Studsvik

Studsvik’s pool facility for storage and inspection of SMILE materials, left: 29 tonnes transportation flask, three pools each about 8 meters deep; and right: pool-in-pool for cutting and inspections...

Multi-compartment THAI+ test facility, Becker Technologies GmbH.

In the wake of the OECD/NEA THAI project, conducted in three phases from 2007 until 2019, a new project, THAI Experiments on Mitigat...

Scheme of the THAI+ facility, Becker Technologies.

The experimental investigations carried out in the frame of the THAI (2007-2009), THAI-2 (2011-2014) and THAI-3 (2016-2019) projects contributed s...

Image: Microscopic examination of U-bearing particles collected at Fukushima-Daiichi, JAEA

TCOFF Phases

First Phase (2017-2020)

The Thermodynamic Characterisation of Fuel Debris and Fission Products ...